Tsymo Pet Feeder Manual Pdf (2024)

FAQs

How to reset automatic pet feeder? ›

Use the end of a paperclip to press and hold the reset/ reboot button for 3-5 seconds until the LED blinks white to show a successful reboot. If the feeder successfully reconnects to your Wi-Fi with internet, the LED will blink blue and then turn solid showing it is fully connected and operational.

Feed Now Not Working/Jammed

Clean the feeder. Replace the batteries with four, new D-cell alkaline batteries. Important: Use only alkaline batteries in the feeder. Press the sleep button on the back of the feeder to resume the programmed feedings.

17: Battery Compartment 18: Compartment Lid 19: Speaker Unlocked Button Press and hold for 3s to unlock other buttons and screen. Press 1-5 times to dispense 1-5 portions of food.

Reset the feeder to factory settings, holding down the Add Pet ( ) button for 10 seconds (until the light starts alternating red / green and the lid opens and closes).

If the router or internet is not working, try resetting the router or contact your internet provider. Power cycle the feeder by turning off the power switch. Wait 10 seconds and turn the power switch back on. Check for other devices near the feeder that use the internet or other wireless signals (such as a microwave).

Yellow Blinking Feeder has power and is in setup mode. Yellow Solid Smartphone is connected to the feeder in setup mode. Blue Blinking Slow Feeder is connected to Wi-Fi but no internet. Blue Blinking Fast Feeder is trying to connect to Wi-Fi or is offline.

If your feeder has a flashing light indicating that it is offline, the feeder will continue to feed as previously scheduled if it has power. Verify home internet is working. If other wireless devices have also lost connection, consider resetting your router and/or contacting your internet service provider.

1. To reset the counter, press and hold the health counter reset button next to the counter display for 3 seconds or until the display resets to 0. We suggest you reset the counter each time you replace the litter tray. Most cats easily adapt to the PetSafe® ScoopFree® Self-Cleaning Litter Box.

Press and hold the Up button and the Down button for three seconds to reset the feeder to factory settings. When the feeder is powered on, press the button once and the feeder will dispense one portion of food.

Why is my Petlibro feeder not connecting? ›

Please unplug the feeder and wait for about 10 minutes, then plug it in and reset it to try again. 4. Please remove the "PETLIBRO LITE" app and reinstall it to check.

Wait until feeder unblocks. If it's still blocked, the red light will remain flashing. The colour of the light remains the same under normal feeding. After feeding is done, if a problem is detected (i.e. Low battery, low food supply or food outlet fails to rotate), red light will be on after 2s.

The Smart Pet Feeder can be reset by pressing and holding the 'feed' button for 5 seconds until a sound is heard. A reset will erase all settings and data on the Smart Pet Feeder and return it to its original factory settings.

The device has a lithium battery. If you do not need to use the device for an extended period of time, you must turn the device off yourself. At the same time, hold down the bowl reset button together with the manual food dispenser button for 5 seconds.